The standard temporary building is designed to be the same configuration as an ISO container and can be transported fully erected using the same handling equipment or flat packed to reduce transport volume.

The flatpack units (in transpacks of approximately 26 inch) are supplied with completely pre-fabricated floor (with PVC floor as standard) and ceiling (with all electrical installations built in such as electrical distribution, lamps and cables). During transport a steel non-slip insert is placed between each ISO corner to secure containers from sliding. The construction of the transpack is solid enough to enable transport and handling by fork lift, 4 units at a time.

The modular structure is designed as a light construction consisting of floor and roof frames and corner profiles. The construction enables complexing of individual containers in longitudinal and transverse directions without limits.
It also enables complexing of containers up to 3 floors in height. The wainscots of the containers are made of light insulation panels and offer good environmental and thermal performance. All materials and manufacturing techniques are environmental friendly.

The container’s effective life span is ten (10) years minimum under harsh field conditions. It is capable of sustaining at least three (3) assemblies and three (3) disassemblies during its life span allowing the system to be broken down into flatpacks and relocated.